Generant High Pressure Gas Control Valve, Series MV
Images are representations only.

Series MV High Pressure Gas Control Valve

Brand: Generant Inc
Request Information
Favorite

The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. 

The High Pressure Oxygen Service Valve Configuration (Material Code “C”) was third party tested per ISO 7291 (O2 Surge) and ASTM G175 (Promoted Ignition). 

The valve is also available with a PCTFE seal (Material Code “K”) for positive sealing in non-oxygen applications. The Series MV is available in a variety of porting and mounting configurations. 

The panel mount configuration is supplied with two panel nuts for easy retro-fitting to existing panel mount installations.
Features
  • Oxygen safe: Copper valve (material code “C”) configuration third party tested per ISO 7291 (O2 surge) and ASTM G175 (promoted ignition)
  • Low torque: Needle thrust bearing maintains low operating torque (<10 in-lbs) throughout full pressure range
  • Flow control: Unique valve geometry allows user to meter flow on initial opening and minimizes initial pressure surges
  • Long Service Life: Optimized material and component selection for long service life; Non-rotating poppet and non-rising stem maintain seat and seal integrity, needle thrust bearing efficiently minimizes wear effects of mechanical load
  • Fast opening: 2.5 turns from closed to full-open
  • High flow: Large orifices and internal flow paths for maximum flow efficiency
  • Field re-buildable: All valves are fully field re-buildable
  • Adaptable to existing installations: Panel mount version supplied with two panel nuts for easy retro-fitting to existing installations

Specifications

Brand

Enclosure, Body Material

  • Brass

Flow Capacity

  • Flow Coefficient: 2.5 Cv for All Valve Configurations

Materials of Construction

  • Handle, Bonnet, Poppet, Inner Bonnet, Washer: Brass, ASTM B16
  • Needle Bearing, Bearing Washer (Both Non-Wetted): ANSI 52100 Bearing Steel 58-62 HRc
  • Replaceable Seat Crush Washer: Copper, ASTM B152
  • Seal Washer: PTFE, ASTM D1710
  • Washer: Zinc-Plated Steel

Mounting

  • Panel Mount

NPS Connection

  • 1” NPSM Male

NPT Connection

  • 1/2” NPT Female
  • 3/4” NPT Female

Nut & Bolt Material

  • Handle Nut: Zinc-Plated Steel
  • Panel Nut: Brass, ASTM B16

O-Ring Material

  • FKM

Operating Pressure

  • Vaccum to psig: 5,500 (kPa: 38,000, bar: 380) at 21.1° C (70° F)

Operating Temperature

  • -40° to 74° C (-40° to 165° F)

Orifice Size

  • Valve: 0.406” (10.3 mm)

Pressure Rating

  • psig: 3,500 (kPa: 24,200, bar: 242) - Max.

Ring Material

  • Back-Up Ring: PTFE, ASTM D1710

Seat / Seal Material

  • Poppet Insert (Seal): Copper, ASTM B152
  • Poppet Insert (Seal): PCTFE, ASTM D1430
  • Replaceable Seat: 303 Stainless Steel for PCTFE Material
  • Replaceable Seat: Monel 400 for Copper Material
  • Stem Seal: FKM for Copper Material
  • Stem Seal: Molythane for PCTFE Material

Stem Material

  • Replaceable Stem: 303 Stainless Steel for PCTFE Material
  • Replaceable Stem: Monel 400 for Copper Material

Documentation

Data Sheets

show more