Metso Jamesbury Safety Shutoff and Vent Valve, Figure 1057
Images are representations only.

Jamesbury Figure 1057 Safety Shut-Off & Vent Valve

Brand: Valmet
Request Information
Favorite

The Jamesbury Figure 1057 Automatic Safety Shut Off Valves are CSA (Canadian Standards Association) approved to meet American National Standards Institute and CSA International Standards Specification Z21.21/CSA 6.5 Automated Valves For Gas Appliances and CGA3.9-M94 Automated Safety Shut Off Gas Valves for providing protection against hazards during operation of fuel systems or fuel burning equipment. 

The valves will operate quickly to isolate or vent upon loss of electrical signal, and operate to isolate or vent if the instrument air pressure is lost.

View Details

Specifications

Brand

Actuator Type

  • Pneumatic
  • Pneumatic Diaphragm Spring
  • Spring Return

Ambient Temperature Range

  • -40° to 52° C (-40° to 125° F)

Approvals & Certifications

  • API 598
  • CE
  • CSA
  • FM
  • PED

Ball Material

  • Monel
  • Stainless Steel

Bearing Material

  • Guide: UHMW Polyethylene

Enclosure Finish

  • UV Resistant Polyurethane Top Coat
  • Zinc Phosphate Epoxy-based Primer Coat

Enclosure, Body Material

  • Actuator: Hard-Anodized PTFE-Coated Extruded Aluminum
  • Carbon Steel
  • Stainless Steel

Environmental Protection

  • Explosion-proof
  • IP66
  • IP67
  • NEMA 4
  • NEMA 4X
  • NEMA 6

Flange Size - 1-1/2” (DN 40)

  • 1-1/2” (DN 40) - 150# ASME
  • 1-1/2” (DN 40) - 300# ASME
  • 1-1/2” (DN 40) - 800# ASME
  • 1-1/2” (DN 6) - 600# ASME

Flange Size - 1-1/4” (DN 32)

  • 1-1/4” (DN 15) - 300# ASME
  • 1-1/4” (DN 32) - 150# ASME
  • 1-1/4” (DN 32) - 800# ASME
  • 1-1/4” (DN 6) - 600# ASME

Flange Size - 1” (DN 25)

  • 1” (DN 25) - 150# ASME
  • 1” (DN 25) - 300# ASME
  • 1” (DN 25) - 600# ASME
  • 1” (DN 25) - 800# ASME

Flange Size - 1/2” (DN 15)

  • 1/2” (DN 15) - 150# ASME
  • 1/2” (DN 15) - 300# ASME
  • 1/2” (DN 15) - 600# ASME
  • 1/2” (DN 15) - 800# ASME

Flange Size - 1/4” (DN 6)

  • 1/4” (DN 6) - 600# ASME

Flange Size - 2” (DN 50)

  • 2” (DN 50) - 150# ASME
  • 2” (DN 50) - 300# ASME
  • 2” (DN 50) - 600# ASME
  • 2” (DN 50) - 800# ASME

Flange Size - 3” (DN 80)

  • 3” (DN 80) - 150# ASME
  • 3” (DN 80) - 300# ASME

Flange Size - 3/4” (DN 20)

  • 3/4” (DN 20) - 150# ASME
  • 3/4” (DN 20) - 300# ASME
  • 3/4” (DN 20) - 600# ASME
  • 3/4” (DN 20) - 800# ASME

Flange Size - 3/8” (DN 10)

  • 3/8” (DN 10) - 600# ASME

Flange Size - 4” (DN 100)

  • 4” (DN 100) - 150# ASME
  • 4” (DN 100) - 300# ASME

Flange Size - 5” (DN 125)

  • 5” (DN 125) - 150# ASME
  • 5” (DN 125) - 300# ASME

Flange Size - 6” (DN 150)

  • 6” (DN 150) - 150# ASME
  • 6” (DN 150) - 300# ASME

Flange Size - 8” (DN 200)

  • 8” (DN 200) - 150# ASME
  • 8” (DN 200) - 300# ASME

Flow Rate

  • 13 to 111 Cv - Series 4000 (Standard Port)
  • 13 to 135 Cv - Series 4000 (Full Port)
  • 6 to 111 Cv - Eliminator & A Style
  • 9 to 1,890 Cv - Standard Port Flanged Valve
  • 9 to 5,100 Cv - Full Port Flanged Valve

Materials of Construction

  • Piston, Cylinder: Aluminum

Media

  • Water

NPT Connection

  • 1” NPT
  • 1/2” NPT
  • 1/4” NPT
  • 1-1/2” NPT
  • 1-1/4” NPT
  • 2” NPT
  • 3/4” NPT
  • 3/8” NPT

Operating Pressure

  • psi: 200 (kPa: 1,400, bar: 14) - Max.

Port

  • Full
  • Reduced
  • Standard

Pressure Drop

  • psi: 1 (kPa: 6.9, bar: 0.69)

Process Temperature

  • 149° C (300° F) - Max.

Response Time

  • Valve Closing: 2 seconds

Seat / Seal Material

  • PTFE
  • Seal: Graphite
  • Seal: TFM
  • Seat: XTREME

Stem Material

  • AISI 630 Stainless Steel, 17-4 PH
  • Monel

Switch Type

  • DPDT
  • SPDT

Trim Material

  • 316 Stainless Steel
  • Stainless Steel

Voltage

  • Solenoid: 120 Vac / 60 Hz
  • Solenoid: 24 Vdc

Welded Connection

  • 1” Socket Weld End
  • 1/2” Socket Weld End
  • 1-1/2” Socket Weld End
  • 1-1/4” Socket Weld End
  • 2” Socket Weld End
  • 3/4” Socket Weld End

Documentation

Data Sheets

show more