Jamesbury FIGURE 1051 Supervisory Cock Valve
Brand: ValmetThe Jamesbury Figure 1051 Supervisory Cocks are FM (Factory Mutual) approved to provide shutoff and position indication for proper fuel light-off of either fuel oil or gas burners.
Developed for use with semiautomatic or manual safety interlock burner management systems, these electric interlocking cocks indicate the burner cock is closed before the light-off sequence can begin.
Figure 1051 Supervisory Cocks allow fast actuation, have low turning torque, and feature reliable, tight sealing for critical fuel control applications. Should the valve be accidentally moved out of the full closed position, the “not closed” condition is signalled to the safety interlock system. Closing the valve requires only a quick quarter turn of the handle.
For added protection, the position of the valve handle gives visual “at a glance” indication of open or closed position.
Limit switches on these cocks are contained in a compact die cast aluminum housing- all moving parts are enclosed to protect the switches from moisture and corrosion, tampering or accidental change. The limit switch housing assemblies are also FM approved to NEMA 4, 4X, and 6; Class I, Division 1, Groups B, C, & D; Class II Div. 1, Groups E, F & G for watertight and explosion proof hazardous location service.
Specifications
Brand
Applications
- Fuel Control Applications
- Oil & Gas Burners
Approvals & Certifications
- FM - Class I, Div. 1, Groups B, C, D, Class II, Div. 1, Groups E, F, G
Ball Material
- 316 Stainless Steel
Electrical Contacts
- Normally Closed
- Normally Open
Electrical Rating
- Switch (DPDT): 4.5 A at 125/250 Vac
- Switch (SPDT): 10 A at 125/250 Vac
Enclosure, Body Material
- 316 Stainless Steel
- Carbon Steel
Flange Size - 1-1/2” (DN 40)
- 1-1/2” (DN 40) - 150# ANSI
- 1-1/2” (DN 40) - 300# ANSI
Flange Size - 1” (DN 25)
- 1” (DN 25) - 150# ANSI
- 1” (DN 25) - 300# ANSI
Flange Size - 1/2” (DN 15)
- 1/2” (DN 15) - 150# ANSI
- 1/2” (DN 15) - 300# ANSI
Flange Size - 2” (DN 50)
- 2” (DN 50) - 150# ANSI
Flange Size - 3/4” (DN 20)
- 3/4” (DN 20) - 150# ANSI
- 3/4” (DN 20) - 300# ANSI
Flow Rate
- 11 to 111 Cv - Series 4000 Valve
- 7.1 to 115 Cv - Eliminator
- 8 to 765 Cv - Series 7000 Flanged Valve
Media
- Fuel
- Gas
- Oil
Port
- Full
- Reduced
Seal Type
- Hermetically Sealed
Seat / Seal Material
- Seat: Delrin
- Seat: PTFE
- Seat: XTREME
Stem Material
- 630 Stainless Steel (17-4 PH)
Switch Type
- DPDT
- SPDT
Trim Material
- 316 Stainless Steel
Valve Size
- 1/2” to 2” (15 to 50 mm) - Eliminator, Series 4000 Valve
- 1/2” to 6” (15 to 150 mm) - Series 7000 Flanged Valve
Valve Type
- Manual
Welded Connection
- 1” Socket Weld End
- 1/2” Socket Weld End
- 1-1/2” Socket Weld End
- 1-1/4” Socket Weld End
- 2” Socket Weld End
- 3/4” Socket Weld End
- Fuel control applications
- Oil & gas burners