Images are representations only.
AP6050 LVDT-Input Signal Conditioner
Brand: EurothermThe AP6050 LVDT Conditioning Module provides synchronous demodulation and conditioning for Linear Variable Differential Transformer (LVDT) transducers used in the control, display, and recording of motion.
The AP6050 LVDT Transmitter provides the AC sine wave excitation (Adjustable from 6 to 10 Vp-p nominally 4 kHz) for LVDT operation.
The module transmits a DC voltage or current output proportional to the motion applied to the input transducer.
Specifications
Brand
Consumption
- Power Consumption: 3 W Typical
- Power Consumption: 5 W, Max.
Electrical Connectors
- 11-Pin
- Screw Terminal
Enclosure Finish
- Urethane Coating
Excitation Voltage
- Adjustable 6-10 Vpp (4 kHz)
- Drives: 250 ohms at 8 Vpp
Input
- ± 800 mV/V
- 1 V/V, Max.
Input Impedance
- > 100 kiloohms
Linearity
- Best Straight Line: 0.25 % of Span Typical
Mounting
- DIN Rail
- Mounting Holes
- Track/Surface
Operating Temperature
- 0° to 60° C (32° to 140° F)
Output
- ± 5 V
- 0-10 V
- 10 V, Max.
- 4-20 mA
- 50 mA - Max.
- Output Drive (Current): 12 V Compliance at 20 mA (600 ohms, Max.
- Output Drive (Voltage): 10 mA - Max.
- Output Drive (Voltage): Bipolar 2 mA - Max.
Output Impedence
- Current: > 100 kiloohms
- Voltage: < 10 ohms
Power
- 120/240 Vac (± 10 %, 50/400 Hz)
Response Time
- 150 milliseconds Typical
Span - Minimum
- 1 mA
- 100 mV
- Input: 20 mV/V
Span & Zero Adjustments
- Factory-Set at Zero & Full Scale, to within 0.5 % of Span, Typical (Adjustment Range to 10 % of Span to Either Side of Factory-Setting, Typical)
Stability
- Within 0.05 % of Span/°C
Storage Temperature
- -20° to 85° C (-4° to 185° F)
Voltage
- Common Mode Voltage: 500 Vdc or Peak AC, Max.
