Images are representations only.
NFP Flow Sensor
Brand: BM TechnologiesThe NFP (NIVUS Full Pipe) has been developed particularly for flow measurement in full pipes with diameters between 100 and 800 mm.
Based on cross correlation method, the system can be used in arrange of slightly to heavily adapted area weighting with a flow profile correction.
The unit has high accuracy and an unrivalled cost/performance ratio. Appropriate NIVUS accessories facilitate installation and keep maintenance expenses low.
Therefore the NFP is an ideal substitute for absolute or defect MIDs and other Measurements. It is not necessarily required to remove existing measurements systems.
Specifications
Brand
Accuracy
- Deviation: < 0.1 %
Cable Length
- 32.8 to 328 feet (10 to 100 metres)
Communication
- USB
Consumption
- Power Consumption: 7 VA Typical for Transmitter
- Power Consumption: Max.
Display
- LCD Display for Transmitter
Enclosure, Body Material
- Wall Mount Enclosure: Polycarbonate for Transmitter
Environmental Protection
- IP65 for Transmitters
- IP68 for Sensors
Frequency
- 1 MHz for Sensors
Humidity
- Maximum
Materials of Construction
- 316Ti Stainless Steel for Sensors
- PEEK for Sensors
- Polyamide 6 (GF30) for Sensors
- Polyphenylene Oxide for Sensors
- Polyurethane, HDPE for Sensors
Measuring Time
- -1 to 6 milliseconds for Sensors
Operating Pressure
- Maximum
Operating Temperature
- -20° to 40° C (-4° to 104° F) for Sensor
- -20° to 50° C (-4° to 122° F) for Sensors
- -20° to 60° C (-4° to 140° F) for Transmitter
Output
- 0-20 mA for Transmitter
Output Load
- 500 ohms for Transmitter
Power Supply
- 100-240 Vac, 10 % / -15 %, 47 to 63 Hz for Transmitter
- 24 Vdc ± 15 % Residual Ripple for Transmitter
- 24 Vdc ± 5 % Residual Ripple for Transmitter
Relay Output
- 2 Relays
Resolution
- 12-bits
Storage Temperature
- -30° to 70° C (-22° to 158° F)
Switch Type
- SPDT
